Leading Manufacturer for 770 PPR Female Thread Coupling to Bolivia Factories
Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for Leading Manufacturer for 770 PPR Female Thread Coupling to Bolivia Factories, "Passion, Honesty, Sound service, Keen cooperation and Development" are our goals. We are here expecting friends all over the world!
Here we show you how to assemble our Telescopic Spindle Extension Stainless Steel COMPACT for Gate Valves.
Korky® WaterWISE® Toilet Fill Valve & Premium Flapper Kit 818Z
Korky WaterWISE Toilet Fill Valve packaged with a premium red Korky Plus flapper
The ONLY dual shut-off fill valve for flapper leaks & hang-ups
Two most commonly replaced toilet repair parts
Fixes: No/slow refill, running toilet & noisy toilet
Stainless steel chain
Korky® WaterWISE® Toilet Fill Valve & Premium Flapper Kit 818Z | https://bit.ly/TrvznF
Hi I’m Jewels and welcome to in the tank with Korky. Today I will be your personal guide in showing you how to install the Korky QuietFILL toilet Fill Valve and Premium Flapper. The first step is to shut off your water supply to your toilet by turning the valve clockwise. Flush your toilet to get rid of excess water in the toilet. Next, sponge out the remaining water in the toilet tank. Place a bucket or pale under the toilet tank to catch the excess water from the supply line and toilet tank. Disconnect the water supply line and unscrew the mounting nut. Pull up on the old valve and lift out of the toilet tank. Remove the old flapper from your flush valve. For plastic flush valves, take your new Korky Flapper and cut off the collar. Attach the flapper ears to the tabs on the flush valve. Then attach the flapper chain to the flush lever with minimal slack. Pull out the valve, place into your toilet tank. To adjust the height, push down until the fill valve water line and tank water line match. Remove toilet fill valve, lock the fill valve in place by simply twisting the upper half clockwise. As a double check, make sure the grooves match up with the pegs. Place the Korky Quiet fill toilet Fill Valve into your toilet tank and hand tighten the mounting nut. Insert the metal clip on one end of the refill tube and attach onto the overflow tube. Then install the opposite end to the fill valve. If kinking occurs, simply cut the refill tube with a scissors to shorten the overall length. Reconnect the water supply line. Then turn on the water supply line by turning the valve counter clockwise until fully open. If you need further assistance with the installation, visit our website or contact us at 1-800-LAVELLE.