Fast delivery for Good design Amico brass ball Valve to Swiss Factory

Fast delivery for
 Good design Amico brass ball Valve to Swiss Factory

Short Description:

       


Product Detail

Product Tags

Our pursuit and company goal is to "Always satisfy our customer requirements". We continue to develop and design superior quality products for both our old and new customers and achieve a win-win prospect for our clients as well as us for Fast delivery for Good design Amico brass ball Valve to Swiss Factory, we are seeking for extensive cooperation with honest customers, achieving a new cause of glory with customers and strategic partners.


 

208

 

 

 

  • Previous:
  • Next:



  • This is the process by which I used to make spool valve bolts on a CNC lathe (in this case a Haas HL-3 lathe) A friend of mine was inquiring how I’ve made them in the past, so here we go. There are always differences from design to design but much of it is applicable to other hollow bolts with o-ring grooves on the outside, like those for Shockers, Ions, Luxes, and similar. This particular bolt is for a Quest-like marker, although noticeably shorter because the “tip” will be made separately then secured later.

    Here’s the program progression:
    1. Face to a finished surface on one end
    2. Centerdrill in order to accept a live center
    (advance live center)
    3. Turn outside profile (rough,finish) in this case one tool is used since the part has lots of undercuts.
    4. Cut outside o-ring/bumper grooves (rough,finish)
    (retract live center)
    5. Drill thru to other end
    6. Ream to the finished diameter
    7. Partoff, or in this case partially partoff then remove by hand as to avoid the part getting smacked by the chuck jaws.

    Afterward the bolts need to be honed for a nice internal surface finish.

    Thanks for watching, hope you enjoyed!

    Write your message here and send it to us
    WhatsApp Online Chat !