Factory source manufacturing Amico brass ball Valve to United Kingdom Factories
Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for Factory source manufacturing Amico brass ball Valve to United Kingdom Factories, We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Polishing metal with a Dremel Stylus, Felt Tip #422 and a Mandrel #401 Polishing Compound #421
Your Dremel rotary tool can be used to polish a variety of metals including jewelry. However we do not recommend using a tool to polish chrome. For this demonstration we’re using a Dremel stylus with a #422 felt tip, a #401 Mandrel as well as some Dremel polishing compound, a Dremel 400 series XPR, 300 and 200 series tool or a 10.8 Volt Lithium Ion tool can also be used for this project.
After your accessory is attached select a lower RPM and turn the tool on. While it’s running dip the tip of the accessory into the compound to cover it. Set the tool back to a higher speed but not too high is it can heat the materials and damage the surface. While holding the object your wish to polish firmly begin lightly working the tool over areas that need attention. For crevices, use the tip of the bit. Use more compound along the way as necessary. When finished wipe off the remaining compound residue with a soft cloth.
Here’s some more thoughts on polishing metal. In crevices you may need to go back with a clean felt tip either a #422 or #414. Polishing bit #520 does not require any additional compound as it is already impregnated with the silicon abrasive and lubricant.
Visist our website to learn more about Dremel Rotary Tools:
How to install the pipe systems
(c) KE KELIT Innovative Pipe Systemes